1.Horizontal Lathe Of CD Series
Main Features
■ Hardened and ground guideway
■ Head Stock with clutch
■ No need for change gear when cutting metric, inch, diametrical pitch, model thread
■ Apron with rapid traverse stick (cross & horizontal)
Standard accessories
3-jaw chuck Fixed center
Coolant system Center sleeve
Oil gun Tools
Optional accessories
4-jaw chuck Tool post guard
Face place Taper turning attachment
Drive plate Digital readout
Steady rest Large steady rest
Follow rest Large follow rest
Full length splash guard Rolling center
Chuck guard Thread chasing dial
Specifications
| Item |
CD6240A |
CD6250A |
CD6266A |
| Max.swing over bed |
400mm |
500mm |
660mm |
| Max.swing over carriage |
220mm |
290mm |
430mm |
| Max.swing over gap |
700mm |
760mm |
910mm |
| Width of guide way |
394mm |
| Dia.of spindle bore |
52mm |
| Taper of center sleeve |
Morse No.6 |
| Spindle speed |
11-1400rpm/22speeds |
| Longitudinal feed |
0.035-2.842mm/rev |
| Cross feed |
0.009-0.804mm/rev |
| Metric thread |
0.5-240(66) |
| Whiteorth thread |
80-1/4(49)tpi |
| Module thread |
0.25-120(57)mm |
| Diametrical pitch thread |
160-7-16DP(50)mm |
| Section of tool shank |
25×25 |
| Travel of top slide |
150mm |
| Max.travel of cross slide |
348mm |
348mm |
393mm |
| Pitch of longitudinal leadscrew |
12mm |
| Travel of tailstock center sleeve |
150mm |
| Diameter of tailstock center sleeve |
75mm |
| Taper of tailstock center sleeve |
MOrse No.5 |
| Main motor power |
7.5kW(50Hz)/5.5kW(60Hz) |
Wooden case/Steel pallet
Gross/net weight(kg) |
750mm |
2740×1150×1900/2580×1120×1610mm |
| 2770/2070 |
2820/2120 |
2928/2228 |
| 1000mm |
2990×1150×1900/2800×1120×1610mm |
| 2815/2120 |
2865/2170 |
2973/2278 |
| 1500mm |
3490×1150×1900/3300×1120×1610mm |
| 3905/2170 |
2955/2220 |
3063/2328 |
| 2000mm |
3990×1150×1900/3800×1120×1610mm |
| 2995/2280 |
3045/2330 |
3153/2438 |
| 3000mm |
4990×1150×1900/4800×1120×1610mm |
| |
3245/2330 |
3493/2798 |
2.GAP-BED LATHE CW SERIES
